In this chapter we will explore other elements of music besides pitch (discussed in previous chapters) and duration (discussed in following chapters). These elements include dynamics, articulations, tempi, stylistic periods, and structural markers.

Dynamics

Dynamics indicate the loudness of music. In Western musical notation, we often use italicized Italian words, which can be abbreviated, to describe dynamics. The dynamic marking forte means loud, while piano means quiet. In sheet music, these words are written either above or below the staff.

Several Italian words and suffixes can modify piano and forte to create a range of dynamics from very quiet to very loud (Example 1). The Italian word mezzo means “moderately.” Musicians say mezzo forte to mean moderately loud and mezzo piano to mean moderately quiet. The Italian suffix -issimo means “very” or “extremely.” Musicians say pianissimo to mean “very quiet” and fortissimo to mean “very loud.” This suffix can be stacked; for example, one can say pianississimo to mean “very, very quietly,” or fortississimo to mean “very, very loudly.”

Dynamics are often abbreviated in Western musical notation, as shown below.

• fff = fortississimo
• ff = fortissimo
• f = forte
• mf = mezzo forte
• mp = mezzo piano
• p = piano
• pp = pianissimo
• ppp = pianississimo

Some composers add even more “-issimo“s, but this is rare. However, you might one day spot a pppppp or an ffffff in music that you play or sing!

There are three other Italian words that are commonly used to indicate a change in dynamic level. Crescendo (cresc.) means to get louder, while decrescendo (decresc.) and diminuendo (dim.) both mean to get quieter. Crescendos and decrescendos are indicated two different ways: either by writing out the abbreviation cresc. or decresc., possibly followed by dots, or by drawing hairpins. The term “hairpin” refers to the following symbols, which roughly approximate the shape of a bobby pin (or “hairpin”), as seen in Example 2.

Articulations

The term articulation refers to the connection or separation between notes and to the accent level at the beginning of a note (its attack). Several articulations are demonstrated in Examples 3–7. Percussion instruments, plucked strings, bowed strings, winds, brass, and voices all have different methods of carrying out particular attacks and articulations. You will want to consult with a private teacher or ensemble director for help with applying different articulations to your instrument or voice.

Example 3: Legato means to play or sing smoothly or connected. This articulation is indicated by a curved slur marking.

Example 4: Another way to indicate smooth, connected playing is with tenuto markings, which look like a small line above or below notes.

Example 5: Staccato means to play or sing notes more separated, leaving space between notes. This articulation is usually indicated by a dot placed above or below notes.

Example 6: An accent (a sideways V) means to play or sing a note with extra stress or emphasis.

Example 7: A marcato marking (an upside-down V) means to play or sing a note with a more forceful accent. 

Accented notes can also be indicated by the italicized abbreviations sfz, sf, or fz (sforzando, forzando, or forzato). These accents are usually interpreted to be slightly more forceful (i.e., louder) than regular accents. These symbols work like dynamics and are placed directly above or below the note to which they apply.

Tempo

Tempo (plural tempi) is the term for how fast or slow a composition is performed. Tempi are usually indicated either specifically, by a metronome marking, or less specifically, by a textual indication. A metronome marking is usually indicated in beats per minute (BPM). A work that is marked ♩ = 60 would contain 60 quarter notes in one minute (one quarter note per second). With a free metronome application (such as Pro Metronome) on your phone, you can easily check the tempo of a work you’re playing or singing.

Like dynamics, most tempo markings are written in Italian. They often appear at the beginning of a work, movement, or section, at the top left of the first staff or system. The most common tempi are as follows:

• Fast tempi: vivace, presto, allegro, allegretto (-etto is an Italian suffix meaning “little”)
• Medium tempi: moderato, andante
• Slow tempi: adagio, largo, lento, grave

Example 8 depicts tempi from the slowest to the fastest:

Composers sometimes use additional Italian words, especially emotive expressions, to modify a tempo marking. Words like assai (“very” or “rather”), espressivo (“expressively”), or cantabile (“singingly”) frequently appear after tempo markings, especially in works written after the year 1800. For example, one might come across tempo markings like “allegro assai” (“very fast”), “andante cantabile” (“a moderate tempo, singingly”), or “adagio espressivo” (“slow and expressive”). Always be sure to look up the definition of any words that you do not know in your music.

Two other Italian words are commonly used to indicate changes in tempo: ritardando (rit.) for a gradual decrease and accelerando (accel.) for a gradual increase. Both words are generally italicized, and they are often abbreviated (rit. and accel. respectively). When these directions are meant to apply to several measures, they are often followed by dots. The dots continue as long as the direction is meant to be followed.

Structural Features

The following words and symbols indicate structural features in compositions. Structural features divide up a work or movement into smaller sections.

• Example 9: A fermata indicates that a note should be held longer than its regular duration. Fermatas often appear at the start or end of a musical section.
• Example 10: A caesura indicates a break or a musical cutoff.
• Example 11: A breath mark indicates a breath for a wind instrumentalist or a vocalist. For percussionists, keyboardists, or string players, it indicates a pause similar in length to a breath.

Repeat signs indicate that a section of music should be repeated (Example 12). If the repeated section ends differently each time, that is indicated with first and second endings (Example 13).

https://musescore.com/user/32728834/scores/6275123/embed

Example 12. Four notes in bass clef surrounded by repeat signs.

https://musescore.com/user/32728834/scores/6275124/embed
Example 13. A repeat sign with a first and second ending in treble clef.

Occasionally you may come across music that has more than two endings. Repeated sections with a third or even a fourth ending are common in some styles of music, such as Broadway musicals. These work like a first and second ending: the third ending is performed after the third time the section is repeated, the fourth ending is performed after the fourth time, and so on.

Stylistic Periods

As you begin to study music theory, it will be helpful to have a basic familiarity with the ways in which music theorists and musicologists historically periodize Western classical music. Time periods in the history of this music are flexible, but having a general framework to group musical compositions with certain stylistic similarities can be useful for musicians.

The following time periods, depicted in Example 14, are generally agreed upon by most musicologists:

• Medieval: c. 600–1400
• Renaissance: c. 1400–1600
• Baroque: c. 1600–1750
• Classical: c. 1750–1820
• Romantic: c. 1800–1910
• Post-tonal: c. 1900–present

• Tutorial on Dynamics (Music Theory Academy)
• Tutorial on Dynamics (Lumen’s Music Appreciation)
• Dynamics Quiz (quizizz.com)
• Articulations (BBC)
• Articulations (libretexts.org)
• Tempo (BBC)
• Tempo (Music Theory Academy)
• Notes on Periodization in Musicology (Oxford History of Western Music)
• Historical Eras in Musicology (Naxos)
• Music Notation Style Guide (Indiana University)

1. Dynamics, pp. 13–17 (.pdf), and pp. 2–4, 18 and 22 (.pdf)
2. Articulations, p. 1 (.pdf)
3. Tempo, pp. 12, 21 (.pdf), and p. 13 (.pdf)
4. Structural Markers, p. 9 (.pdf)
5. Mixed Terminology, pp. 13–17, 23 (.pdf)

1. Dynamics, Articulations, Tempi, Stylistic Periods, Structural Features (.pdf, .docx)